microcement bathroom

Microcement Shower Trays

The Experts In Microcement Wetrooms

Resin Rock microcement shower trays are the first dedicated solution for creating a step-free and seamless microcement bathroom or wet room.

MST has been created by microcement industry professionals whose knowledge was built on a foundation of onsite microcement installations.

 Providing the exact insight required to offer the perfect solution for a microcement ready wet-room tray.
As we know extremely well, preparation for a seamless microcement bathroom or wet room is paramount.

Unfortunately, retrofitted trays being sold as suitable always have their downsides. Either poor quality unsuitable materials being used, or wrong specifications are commonplace when it comes to off the shelf trays.
Info@microcementshowertray.co.uk

SHOP NOW
microcement shower trays

Factory Primed Surface

All Trays Supplied With A Highly Textured Pre-Primed Coating
This surface Enables Extreme Bond Strength For All Types Of Microcement Coating 

No Plywood - 100% Waterproof

 British Standard 5385 part 1: 2018 States "The use of sheets or boards that are subject to movement from changes in moisture content should be avoided. Plywood and other wood-based sheets or boards should not be used"

Plastic Free Design

Extremely Poor For Microcement Adhesion
Avoid premature failures and delamination caused by using plastic trays and drains 

No XPS Foam board

Any Type Of Foam Or "Wedi" Board Are Not Suitable To Receive A Microcement Finish

 Foam core trays offer very low compressive strength usually resulting in a failure within a few weeks after installation. This combined with incorrect drain height will certainly result in costly remedial work soon after the initial completion of the Installation 

Bespoke Sizes

Bespoke sizes and drainage options available upon request.

Microcement Compatibility

Factory primed surface ensures maximum bond strength. 

Trade Discount Scheme

Discounts available for microcement applicators.

100% Waterproof

No Wood Or Absorbent Materials Used Throughout The Design

parallax

Designed By Microcement Installers,
For Microcement Installers.

Avoid Using unsuitable GRP shower formers designed for glued vinyl, often sold as suitable for microcement.

Unfortunately, delamination may occur as a result of high plastic content and weak two-piece construction located at the most vulnerable area of a microcement installation.